In need of a 3D design for printing.
We are using a Bambu Lab A1 Mini 3D printer and the file you create will need to be 100% compatible with the Bambu Lab A1 Mini printer and a MacBook Pro running OS Sonoma 14.4.
A few photos are attached to this listing. The photos are an example of the accessory, created in clay, to show you basically what the final piece should look like.
Please note, the clay sample is rough and the piece you design will need to be more refined with clean edges.
If you need a JPG file, of the logo, please let me know and I can send it over.
I will need to send you the specific measurements for the piece you have to create, which we can do once you are selected for the project. I can email you a sketch with all of the dimensional call-outs, hand written or in a PDF.
The approximate size of the piece is as follow:
– 19 mm wide at the top (Left to Right)
– 42 mm wide at the widest point (Left to Right)
– 36 mm high (Top to Bottom)
– 3 mm thick (Front to Back)
* Would also like to see a 5 mm thick version
The piece will need to have a bracket at the back to allow it to attach to a piece of fabric. All of this will be clear, once you see the photo of the sample.
The bracket will need to have 5 mm of clear space inside of its “U-shaped” construction.
A key element will be our need to have the ability to scale the image up or down as needed, so we can print a smaller version or larger version if needed.
Similar to a piece of vector art, if that is how 3D design software works.
If you have any questions please feel free to email.
Also, of note, I am using a MacBook Pro to connect to the printer and I do not have AutoCAD, or any 3D printing software.
Please let me know what software you will be creating in or what software I will need to download so I can print the file you create.
Thank you!
